-Pair of scissor
-Few paper clip
-UHU all purposed glue
-Double sided tape
-Fabric (Little piece)
Step one :
-Prepare a piece of fabric (Recommended size 8cm*5cm).
-Cut a strip of double sided tape and stick on the middle of the fabric.
Step two :
-Peel off and fold both side of the fabric to stick on.
*While you fold down left side, remember to leave some space for the right side to stick on too.
Step three :
- Cut another small strip of double sided tape and stick on the top, place in the middle.
Step four :
-Fold in both side again. Same step as the one above.
Step five :
-Prepare another strip for the middle that will be used to wrap the bow. (Recommended size 5cm*2cm)
-Use the same method, cut a strip of double sided tape in the middle and fold the side to prevent fringe from coming out.
Step six :
-Fold the bow tie to the shape you wanted, apply glue on the end of the small piece of fabric.
Step seven :
-Hold the shape and press it to stick on and wrap around.
- You need to squeeze the bow together.
Step eight :
-You will get this result when the fabric is patch on. Used the prepared U paper clip, place on the middle and pull out the access fabric.
-Apply a bit of glue to let the paper clip stay on.
Step nine :
-Fold the end of the fabric to prevent the fringe as well.
-Apply glue on the top and press down the fabric to cover the paper clip.
-Make sure don't apply too much glue to prevent leaking.
TAADAAA!!!!FINISH!!! NOW IT"S TIME TO WAIT FOR IT TO DRY!